One of the most common questions we get from techs is about using a voltmeter to diagnose a high voltage circuit. It's especially tricky when a tech is used to working on a low-voltage or 120V circuit, where there is a clear “hot” side of the circuit and a clear “grounded” side of the circuit. […]

There's a moral to this story, though it is a bit more of a cautionary tale than most I write. While it doesn't rank with the story of three wise men or even Frank Capra's Christmas classic “It's a Wonderful Life,” you may find some common threads with both learning wisdom and remembering why throwing […]

A 40VA transformer is rated for 40 VA or volt-amps on the secondary. For a typical 24 volt secondary, this is simply using Watt's law to calculate amperage. (For more information on Watt's or Ohm's laws, please check out this article HERE.) 40 ÷ 24 = 1.666666 ∞ (round up to 1.67 already) So, you […]