The most common diagnosis with expansion valves is failed closed or restricted, resulting in underfeeding of the evaporator. The symptoms are low suction, normal subcooling, and high superheat when a TXV fails “shut,” but there are some other issues to watch for that can actually result in overfeeding the coil. Schrader in the Port The […]

Here's the first question: Does it really matter if the speed taps on a motor are run or common? Well, yes… sort of. In some cases, it helps to identify if you're dealing with an open winding or an open thermal overload. The thermal overload breaks common, but you will still read a path between […]

This article was written by Senior Boiler Tech Justin Skinner. Thanks, Justin. Oil burner nozzles are present in most forced combustion air burners. They are used with an oil pump to atomize fuel oil and allow it to burn. Atomizing is raising the pressure of the fuel and forcing it through the nozzle. Essentially, the […]