This is a video tech tip from our friend Brad at HVAC in SC. In this video, Brad demonstrates that using a cap off of a refrigerant tank on a system can depress the Schrader core on the system in some cases. Make sure to use proper caps that have seals or brass flare cones. […]

Evaporator temperatures below 32° are common and acceptable in refrigeration; that's why there is a defrost sequence. In a heat pump running in heat mode, it's the same; freezing is a part of the process, and defrost is necessary. In comfort cooling, we can't allow the evaporator to get below 32°, or it will freeze. […]

When I started in the trade in 1999, there were still many oilable blower motors in service. As part of the maintenance, we would remove the housing and oil the motor. We would also vacuum the motor and wipe it down. As oilable motors have become extinct, I see fewer and fewer techs pulling the […]