This article was written by Regan Murphy. Thanks, Regan! Disclaimer: Any percentages used are the opinion of the author and not based on any actual facts. You are probably already used to getting the model and serial numbers of the equipment. You may have even made a habit of getting the part number, but there […]

Photo by Ulises Palacios Refrigerant circuit restrictions can be common things like a plugged filter drier or a restricted metering device. They can also be more difficult to diagnose and stem from exotic issues like a kinked liquid line, blocked evaporator feeder tube, or a compressor connected improperly with a discharge line full of solder […]

As HVAC/R techs, we don't generally do a lot of soldering—unless you are in a shop that has embraced Stay Brite® 8 from Harris. Several aluminum repair products on the market also use an indirect soldering type technique, so this is a general and generic overview of some best practices. As always, follow the manufacturer's […]