Fundamentally, three-phase, alternating current motors are about as simple as a motor gets. The power company produces three phases by spinning magnets. Then, on the other end, we produce electromagnets that spin the motor according to the same 60 cycles per second frequency (60hz). All three phases are 120 degrees out of phase from one […]

Both wet-bulb temperature and air enthalpy are extremely useful to understand when calculating actual system capacity and human comfort. Dry-bulb temperature is a reading of the average molecular velocity of dry air. However, it does not account for the actual heat content of the air or the evaporative cooling effect of the air. When air […]

Proving flame is an important part of the gas firing sequence. Without proof of flame, you risk dumping unspent gas into the heat exchanger, resulting in an explosion. There are many ways to “prove flame,” but we are focusing on the flame sensing rod (flame rectification) method here. Here are the facts: Flame sensing rods, […]