One of the most common questions we get from techs is about using a voltmeter to diagnose a high voltage circuit. It's especially tricky when a tech is used to working on a low-voltage or 120V circuit, where there is a clear “hot” side of the circuit and a clear “grounded” side of the circuit. […]

First off, I want to thank Ulises Palacios for taking these photos. He is in the habit of cutting open the compressors he replaces to see why they failed (when possible). I think that's pretty boss. So, why would the compressor have copper plating on the inside? They certainly aren't manufactured that way. The short […]

This is the second article in a three-part series where we explore advanced psychrometrics. The source material for each of the articles in this series is ACCA Manual P Sections 3, 4, and 5. This article is based on information found in Section 4. If you followed the previous advanced psychrometrics article, you now know […]