This article is written by one of the smartest guys I know online, Neil Comparetto. Thanks, Neil! Recently, I posted a question in the HVAC School Group on Facebook that went like this: “When designing a residential duct system, what friction rate do you use?” As of writing this, only one answer was correct according […]

If you are used to simple, straight-cool split systems, you know that the low voltage to the outdoor unit is usually VERY simple. In many cases, there's just a Y (contactor power) and a C (common) connected to the outdoor unit. When the condensing unit controls are strictly two-wire low voltage, there is no continuous […]

Photo Courtesy of Parker/Sporlan There are many brands and styles of evaporator pressure regulating valves (EPR), but none as common as the Parker/Sporlan SORIT and ORIT valves. The diagram above clearly shows some of the common applications. An EPR or “hold back” valve maintains a set suction line pressure and, therefore, coil temperature. That is […]