HVAC/R Evacuation Quiz September 9, 2023, 5:02 am

By September 9, 2023

HVAC/R Evacuation Quiz September 9, 2023, 5:02 am

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

Phil Barr and Nathan Orr join the podcast to talk about wiring refrigerated cases in commercial spaces, including convenience stores and supermarkets.

Cases may be medium-temp (or high-temp, in some cases) or low-temp. Medium-temp cases can typically defrost on their own during the off cycle, and low-temp cases may have electric or hot-gas defrost to help get ice off the coil at set intervals. Each system has an evaporator (and fans), compressor, condenser, and metering device (often a TXV or EEV), and low-temp refrigeration may have anti-sweat heaters, EPRs, and other components to manage.

Challenges arise when electricians don’t understand the fundamentals of commercial refrigeration, especially as the electrical circuitry relates to the refrigeration circuit components. Time crunches also apply a lot of pressure to electricians and refrigeration technicians. Testing circuits, such as fans and lighting, or using circuit tracers are good ways to get an idea of how an existing system is wired. Labeling wires and breakers and keeping those labels or information in places where others can read them can help you and other electricians in the future.

One of the most common issues happens when technicians or electricians refuse to test out their results to catch their mistakes before callbacks happen. Even seemingly small electrical issues, such as improper lighting, can cause costly losses if product spoils and cannot be sold.

Phil, Nathan, and Bryan also cover:

Changes in central and case control strategies over time
Challenges with retrofits and remodels
Central lighting controls
Mistakes that can be made when labeling wires or breakers
Working against the clock
Terminal blocks, DIN rails, and connectors
Making mistakes and the origin of animosity

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Search Episodes

Wiring Refrigerated Cases w/ Nathan & Phil

09/14/2023

Bryan Orr

Things to Keep out of the System – Class

09/07/2023

Bryan Orr

ACH (Air Changes Per Hour) – Short #174

09/05/2023

Bryan Orr

Oil Return and Refrigerant Charge in VRV w/ Roman Baugh

08/31/2023

Bryan Orr

Magical Air Cleaning Oxides? – Short #173

08/29/2023

Bryan Orr

Can Filters Capture Viruses? – Short #172

08/22/2023

Bryan Orr

Heat Pumps + Inverters w/ Joey H

08/17/2023

Bryan Orr

Get Air Where it Needs to Go W/ Joey H.

08/10/2023

Bryan Orr

Business Round Table – Tersh, Peterson, Holt

08/03/2023

Bryan Orr

Cap Tubes and Flow Facts – Short #171

08/01/2023

Bryan Orr

Search Results placeholder

Comments

Related Tech Tips

Some Belt Tensioning Thoughts

We had a really great conversation on the HVAC School Facebook Group about some belt tension best practices. It turns out that even a lot of really smart and experienced techs are not aware of all the factors related to belt tensioning. Myth #1 is that amperage is used to set belt tension. Now, don't […]

Sometimes, Experience Can Hold You Back

When working in a business with people, you have two options: 1. Become bitter as you experience people, life, and issues. 2. Grow from experiencing people, life, and issues. I’m not proud to say it, but I realize now that when I started my business and had bad experiences, I would run to option #1 […]

Why You Need a Torque Wrench (or Two…)

I’ve got a confession to make. I'm “that guy.” Call it OCD, call it being anal-retentive, but I'm always making an effort to be as technically correct as possible. One aspect of that effort has been the use of torque indicating or torque limiting tools when tightening fasteners. It started after I put new valve […]

More tech tips