Ever since Nikola Tesla invented the modern induction motor, we have been struggling with varying the speed of motors efficiently and reliably. The trouble in the HVAC industry is that there are several different types of technologies in play, and they can easily get confused. ECM (electronically commutated motor) In residential and light commercial HVAC, […]

Belly band crankcase heater When I first started in the trade as an apprentice, we worked on many Trane heat pumps that used crankcase heaters. These crankcase heaters slid into the compressor sump on the big orange Tyler reciprocating compressors. They looked like the one in the picture below. It was very common for these […]

Deburring copper tubing (often called reaming) is the practice of running a blade around the inside of tubing after you cut it to remove the burr edge from the inside. It's an important practice and should be performed whenever possible. Deburring reduces turbulence inside the lines, as burrs can cause turbulence. HOWEVER… YOU MUST MAKE […]