To start, I'm going to cut straight to the part that most of you want to know. This information is based on calculations I have done personally based on typical Mastercool DOT tanks, but feel free to come to your own conclusions based on your own calculations. I prefer to stay on the safe […]

This is a video tech tip from our friend Brad at HVAC in SC. In this video, Brad demonstrates that using a cap off of a refrigerant tank on a system can depress the Schrader core on the system in some cases. Make sure to use proper caps that have seals or brass flare cones. […]

First, let's get something straight: BRAZING is when you use a filler rod that isn't the same material as the base metal but melts ABOVE 840°F. Soldering is the same but at temperatures BELOW 840°F. With HVAC rods melting at around 1200°F, it confuses me why we usually call it “silver solder” but also often call it […]