Jesse Grandbois is one of the techs who reads the tech tips, and he wrote a few tips that he wanted to share on some gas furnace control basics. This tip is about the basic terminal designations on a typical 24v gas valve. Thanks, Jesse! Have you ever noticed the TH/TR terminal on a gas […]

This article was written by HVAC/furnace technician Benoît Mongeau. Thank you, Ben.     High efficiency (or 90%, or condensing) furnaces use a set of two heat exchangers to retrieve more heat from the combustion products than their mid-efficiency counterparts. Because of this, they generate flue gases much colder than those of a mid-efficiency or […]

Whenever there is a conversation where “code” is involved, it's important to mention that codes can vary depending on the AHJ or authority having jurisdiction. It's becoming more common for governments to lean heavily on the ICC (International Code Council). In the case of HVAC/R, that is the IMC (International Mechanical Code), and in the […]