Deburring copper tubing (often called reaming) is the practice of running a blade around the inside of tubing after you cut it to remove the burr edge from the inside. It's an important practice and should be performed whenever possible. Deburring reduces turbulence inside the lines, as burrs can cause turbulence. HOWEVER… YOU MUST MAKE […]

When evacuating, the FASTEST way is to use two large-diameter hoses connected to two core removal tools and the cores removed. These hoses are then connected to the pump using a tee or evacuation “tree.” However, when you only have one large hose, another acceptable method is to connect the large hose to the suction […]

Jacques Charles was a French physicist (and a real looker based on that photo) born in 1746. Little is known about his educational and family background, but he began his career as a clerk at the Ministry of Finance in Paris. After a short time as a financial clerk, he began focusing on science. The […]