When mounting a TXV bulb or checking bulb placement, there are a few important considerations (listed in order of importance): Mount the bulb on the suction line. Flapping in the breeze is no good. Mount it TIGHTLY with a proper metallic strap (usually copper, brass, or stainless steel)—not with zip ties or tape. Position it on […]

    Everyone in the HVAC/R trade uses some type of torch to braze or solder alloys together. So, what is the proper way to handle an oxyacetylene torch? It turns out that there’s more than one right answer. Depending on which torch rig you use, the manufacturer’s manuals for operation may vary.  Everyone (hopefully) knows […]

This article was submitted by Genry Garcia of Comfort Dynamics, Inc. It is the final part of his series on zonal pressure diagnostics. Thanks, Genry! Updated 3/4/2022 Picking up where we left off in part 2 of the series, we discussed how a pressure reading from an attached zone indicates only the ratio of the […]