Connecting more than one wire on or under a single lug or connection point is called “double lugging,” and it is ONLY allowed in line voltage wiring under one condition, according to NEC 110.14: If the terminal, lug, or connector is specifically rated for more than one wire In the case of a conductor splice, […]

This article is written by a regular contributor, experienced rack refrigeration tech, and RSES CM Jeremy Smith. Thanks, Jeremy. Also, there is a podcast out about what kills compressors HERE. A technique that you can use to diagnose compressor problems and help differentiate them from other possible issues is compressor performance analysis. Manufacturers do extensive […]

As HVAC/R techs, we don't generally do a lot of soldering—unless you are in a shop that has embraced Stay Brite® 8 from Harris. Several aluminum repair products on the market also use an indirect soldering type technique, so this is a general and generic overview of some best practices. As always, follow the manufacturer's […]