This article was inspired by an email we received from a viewer of our HVAC School YouTube channel, Jim Holbrook. Thank you, Jim! Disclaimer: This article is written to help educate you and hopefully save lives. We are NOT an authority on the topic. OSHA, as well as company best practices and risk assessments, should […]

Let's first state the obvious. Most techs are intimidated by psychrometric charts and Mollier diagrams. We JUST ARE. While there are some pretty complicated formulas that back up these diagrams, using them isn't that big of a deal once you understand the different elements and then focus on one at a time. BUT WHY DO YOU […]

Most motors are designed to a set amount of work, usually rated in either watts or horsepower (746 watts per HP). Watt's law states that watts = volts x amps. If a particular motor needs to do 1 horsepower of work at 120 volts, it will draw about 6.22 amps. And yes, in an inductive […]