I got a lot of comments that many of you discharge run capacitors with a voltmeter. I test this method vs. the capacitor discharge tool I created. Obviously, many of you use needle nose pliers or a screwdriver. While this is widely practiced, it could result in an arc, shock, or damage to the capacitor. […]

Some quick basics – An ohmmeter is used to measure the resistance to electrical flow between two points. The ohmmeter is most commonly used to check continuity. Continuity is not a “measurement” as much as it is a yes/no statement. To say there is continuity is to say that there is a good electrical path […]

Have you ever noticed that a blower motor rated for 120V draws about twice the amperage of the same horsepower motor rated at 240V? That is because motors are rated in watts or horsepower, and according to Watt's law, Watts = Volts x Amps. To keep the wattage output the same at 120V, it draws […]