This is a video tech tip from our friend Brad at HVAC in SC. In this video, Brad demonstrates that using a cap off of a refrigerant tank on a system can depress the Schrader core on the system in some cases. Make sure to use proper caps that have seals or brass flare cones. […]

Fundamentally, three-phase, alternating current motors are about as simple as a motor gets. The power company produces three phases by spinning magnets. Then, on the other end, we produce electromagnets that spin the motor according to the same 60 cycles per second frequency (60hz). All three phases are 120 degrees out of phase from one […]

There are three reasons why I don't like infrared thermometers for many HVAC tasks. #1 – The laser can be misleading The laser dot is just a point of reference, not an exact point where it is reading. Often the thermometer will read lower, higher, or over a MUCH wider area. Unless you are right […]