Capacitors are traditionally tested with a capacitance meter (commonly found as a function within a multimeter), with the component taken entirely out of the circuit. “Bench testing,” as this method is referred to, is hands-down the safest method of checking capacitance in microfarads. All other methods require the capacitor to be wired into the circuit […]

I've always opposed the practice of grabbing a hub puller as the first method of removing a blower. This video by Brad Hicks with HVAC in SC on YouTube demonstrates the exact method I use to safely remove a blower wheel without damaging anything. Thanks, Brad! Transcript What's going on, guys? Here's another 60-second tech […]

Most motors are designed to a set amount of work, usually rated in either watts or horsepower (746 watts per HP). Watt's law states that watts = volts x amps. If a particular motor needs to do 1 horsepower of work at 120 volts, it will draw about 6.22 amps. And yes, in an inductive […]