This article was submitted by Genry Garcia of Comfort Dynamics, Inc. It is the second part of his series on zonal pressure diagnostics. Thanks, Genry! In Part 1 of this series, we outlined the basic understanding of ZPD—what it means and what it does. Most importantly, we showed how an effort to simplify a fairly […]

Some quick basics – An ohmmeter is used to measure the resistance to electrical flow between two points. The ohmmeter is most commonly used to check continuity. Continuity is not a “measurement” as much as it is a yes/no statement. To say there is continuity is to say that there is a good electrical path […]

Most motors are designed to a set amount of work, usually rated in either watts or horsepower (746 watts per HP). Watt's law states that watts = volts x amps. If a particular motor needs to do 1 horsepower of work at 120 volts, it will draw about 6.22 amps. And yes, in an inductive […]