Evaporator temperatures below 32° are common and acceptable in refrigeration; that's why there is a defrost sequence. In a heat pump running in heat mode, it's the same; freezing is a part of the process, and defrost is necessary. In comfort cooling, we can't allow the evaporator to get below 32°, or it will freeze. […]

The most common diagnosis with expansion valves is failed closed or restricted, resulting in underfeeding of the evaporator. The symptoms are low suction, normal subcooling, and high superheat when a TXV fails “shut,” but there are some other issues to watch for that can actually result in overfeeding the coil. Schrader in the Port The […]

If you work in refrigeration, you may have heard the term “hot pull down.” This phrase describes a condition where the load on the evaporator is above design due to the box temperature or the temperature of the product in the box being higher than it would normally be. My grandpa called me a few […]