“Service factor” is an interesting motor rating that you will see on many motor data tags. It simply means how much additional “work” a motor can do or how much “load” it may be placed under for short periods of time without failure or overload. For example, the FLA or full load amps of the […]

This photo is of a blower door test we performed at my own house using a Retrotec blower door. You will notice the 15-passenger van outside the window, which is a dead giveaway. A blower door is used to measure the tightness of a building and is often discussed in terms of an ACH50 number. […]

Pump down solenoid valves are commonplace for any refrigeration technician. They are energized with the compressor still running, shutting off flow in the liquid line so that the refrigerant is pumped into the condenser and receiver. The compressor will then shut off once a low-pressure switch opens the circuit when the pressure falls below a […]