If you don't use a scale every time you add or remove refrigerant, I suggest you begin doing so immediately, if not sooner. Weighing in while charging is fairly obvious, and it's useful so you can keep track of what you are using and how much to charge a customer. When you have a system […]

This article was written by my good buddy, Bill Frisbie. Bill is a service manager and crack technician at AirFx, a Trane dealer in lovely Inverness, Florida. Thanks, Bill! One of the most intimidating things in the field is to walk up to a piece of equipment that you have either never worked on or […]

Photo by Ulises Palacios Refrigerant circuit restrictions can be common things like a plugged filter drier or a restricted metering device. They can also be more difficult to diagnose and stem from exotic issues like a kinked liquid line, blocked evaporator feeder tube, or a compressor connected improperly with a discharge line full of solder […]