A lot of proper duct design comes down to an understanding of available static pressure and friction rate. We've covered this topic several times on this site and the podcast, but I wanted to focus on this ACCA chart specifically (shown above). ASP The horizontal axis is available static pressure or ASP, and it's indicated […]

A 40VA transformer is rated for 40 VA or volt-amps on the secondary. For a typical 24 volt secondary, this is simply using Watt's law to calculate amperage. (For more information on Watt's or Ohm's laws, please check out this article HERE.) 40 ÷ 24 = 1.666666 ∞ (round up to 1.67 already) So, you […]

Every piece of air conditioning equipment can move a certain amount of heat BTUs (British Thermal Units) at set conditions. In most cases, during the cooling mode, a portion of those BTUs will go toward changing the temperature of the air, and a part will go toward changing vapor water in the air into water […]