Some quick basics – An ohmmeter is used to measure the resistance to electrical flow between two points. The ohmmeter is most commonly used to check continuity. Continuity is not a “measurement” as much as it is a yes/no statement. To say there is continuity is to say that there is a good electrical path […]

The TXV powerhead or power element is the part of the valve that sits on top of the valve to which the sensing bulb is attached. The powerhead provides the opening force for the valve by translating force from the bulb to a diaphragm in the element that forces the valve open. The sensing bulb […]

Swaging copper is one of the most common practices in our trade when it comes to brazing pipes. Yes, it sometimes makes more sense to slap on a coupling or street ell fitting, but most of the time, cutting your braze joints in half is much easier and faster during an install or repair.  So, […]