Deburring copper tubing (often called reaming) is the practice of running a blade around the inside of tubing after you cut it to remove the burr edge from the inside. It's an important practice and should be performed whenever possible. Deburring reduces turbulence inside the lines, as burrs can cause turbulence. HOWEVER… YOU MUST MAKE […]

Let's take a walk through the startup and commissioning procedure of a conventional or “single” refrigeration condensing unit. We’re going to start with a unit that is fully piped in and has been pressurized for leak and strength testing. For brevity, we are going to assume a basic familiarity with industry standards, company and customer […]

It's Friday at 6 PM. The schedule is clear, as far as you can tell. Other guys have been getting cleared right and left, so you call in standby. Five minutes pass. Ten minutes pass. You check in again, and sure as &%$#, there it is! You get sent across town to another call that […]