Basic Refrigeration Circuit October 14, 2021, 6:46 pm

By October 14, 2021

Basic Refrigeration Circuit October 14, 2021, 6:46 pm

Check out our most recent video

Locked Compressors

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

Nikki Krueger from Santa Fe Dehumidifiers returns to the podcast to talk about dehumidification equipment and strategies in the shoulder seasons (spring and fall). The shoulder seasons (and the weeks leading up to them) are when many homeowners begin to notice moisture problems in their homes.

HVAC units and dehumidifiers should have a king-queen relationship. The HVAC unit is the king and controls the bulk of temperature and humidity during the day, but the dehumidifier can take care of the humidity when the king needs help. To remove moisture optimally, an HVAC unit needs longer runtimes and a cold evaporator coil. However, there will still likely be gaps in performance, and that’s when the dehumidifier can step in.

Proper equipment sizing can help us achieve better runtimes; we want to avoid oversizing the HVAC equipment, but oversizing is a bit less critical when it comes to installing dehumidifiers. The actual install configuration is more important when it comes to dehumidifiers (i.e., whether it takes supply or return air and ties into the supply or return).

Dehumidification can be coupled with ventilation and filtration; ventilating dehumidifiers bring in outdoor air and should filter it before dehumidifying. The air mixing tends to occur in the dehumidifier, and the mixed, dehumidified air then moves into the supply airstream.

Nikki and Bryan also discuss:

Condensating vents, walls, and equipment
Modern homes, energy efficiency, and HVAC
Infiltration and the building envelope’s effect on humidity
Effects of equipment sizing and wall/duct insulation
Fan speed, air mixing, condensation, and humidity
Andy Ask and Ken Gehring’s contributions and legacies
Humidity from household habits and behaviors
Santa Fe Oasis 105 features and operation

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Search Episodes

Dehumidification in Shoulder Seasons w/ Nikki

09/29/2022

Bryan Orr

Time Management – Short #153

09/27/2022

Bryan Orr

Become a Better Mentor w/ Eric Kaiser

09/22/2022

Bryan Orr

HVAC Measurement Types and Benefits

09/15/2022

Bryan Orr

Ventilation and 62.2 Intro & Rant w/ Genry Garcia

09/08/2022

Bryan Orr

Pressure Enthalpy without Tears

09/01/2022

Bryan Orr

Total Heat of Rejection – Short #152

08/30/2022

Bryan Orr

Hard Start vs. Easy Start

08/25/2022

Bryan Orr

Heat of Compression – Short #151

08/23/2022

Bryan Orr

Intro to ACCA Manual T

08/18/2022

Bryan Orr

Search Results placeholder

Related Tech Tips

Refrigerant Oil Basics

First, here's a quick summary of the role of oil in the refrigerant circuit: The compressor requires oil for the lubrication of the moving parts in the compressor. We would keep 100% of the oil in the compressor if we could. However, that is generally unrealistic. So, we need to utilize oils and oil strategies […]

Motor Overheating

An important rating on motors is the AMBIENT temperature rating that the motor can operate at. This rating refers to the temperature of the air around the motor, not the temperature of the motor itself or even the temperature of the outdoor air—since the motor is often in a condenser air stream that is higher […]

Don’t Forget the Service Wrench

One of my most popular YouTube videos goes over how to adjust TXV superheat. It's a very simple little video that I did at my desk, and the other day I got this comment: “Good Video but I hate to say this BUT, with the title SCHOOL, why would you show the public an instructional […]

More tech tips