We had a really great conversation on the HVAC School Facebook Group about some belt tension best practices. It turns out that even a lot of really smart and experienced techs are not aware of all the factors related to belt tensioning. Myth #1 is that amperage is used to set belt tension. Now, don't […]

In HVAC systems, liquid and vapor will exist at the same time and place. We call that condition saturation, or we say that the refrigerant is “at saturation.” Phase changes occur in the evaporator and condenser, so these are spots where liquid and vapor coexist while the system is running. Saturated conditions occur whenever liquid […]

Proving flame is an important part of the gas firing sequence. Without proof of flame, you risk dumping unspent gas into the heat exchanger, resulting in an explosion. There are many ways to “prove flame,” but we are focusing on the flame sensing rod (flame rectification) method here. Here are the facts: Flame sensing rods, […]