There are many acceptable methods for making a wire splice, and you need to consider many different factors when making a splice. Here are a few considerations. High Voltage vs. Low Voltage – If the connection is 24V or less, it USUALLY has fewer NEC (National Electrical Code) rules and regulations concerning how the connections are […]

  This article was written by my good friend, Neil Comparetto. He is one of the all-around best dudes in the industry and a guy who practices what he preaches on duct design. Thanks, Neil! These are some fundamentals for designing and installing duct systems that I’ve learned over the years. Included are links to […]

The photo above is of a real condenser coil we cleaned. The outer fins looked OK, but dirt and lint were packed deep inside. We also had sky-high head pressure and condensing temperature; those are telltale signs of an impacted condenser. That situation illustrates that a coil can sometimes look OK at first glance but […]