Basic Refrigeration Circuit July 20, 2021, 6:31 pm

Comments

Related Tech Tips

An even EASIER way to check capacitors
In a previous article, we covered the standard way to check capacitors under load. I am now going to give you an even easier test. A properly functioning PSC (permanent split capacitor) or CSCR (capacitor start capacitor run) motor should have a power factor of very close to 1 if they have a properly sized […]
Read more
Under Pressure
A few weeks ago, I was hired to consult on a multi-family new construction project.  The building was already framed, and the ducts were roughed in.  The owner of the building was concerned with the quality of the ductwork.  He noticed that the HVAC company was not following the mechanical engineer's plans. This was my […]
Read more
Condensate Drainage in a High Efficiency Gas Furnace
This article was written by HVAC/furnace technician Benoît Mongeau. Thank you, Ben.     High efficiency (or 90%, or condensing) furnaces use a set of two heat exchangers to retrieve more heat from the combustion products than their mid-efficiency counterparts. Because of this, they generate flue gases much colder than those of a mid-efficiency or […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from