Deburring copper tubing (often called reaming) is the practice of running a blade around the inside of tubing after you cut it to remove the burr edge from the inside. It's an important practice and should be performed whenever possible. Deburring reduces turbulence inside the lines, as burrs can cause turbulence. HOWEVER… YOU MUST MAKE […]

Measuring airflow is easy. Measuring airflow accurately is quite a bit more difficult. In many cases, when we as technicians measure airflow, we are trying to get to the almighty CFM (cubic feet per minute) volume measurement. You can take CFM readings fairly easily with a hood, like the Testo 420, but even a hood […]

Many HVAC/R technicians (including me) describe the compressor as the heart of the refrigeration cycle. It prepares the refrigerant for the condensing process, which is crucial for heat rejection.  However, some refrigeration methods don’t require a compressor. In this article, we’ll look at those methods and their applications.   Gas movement without compressors As you […]