I was about 13 years old the first time I bent EMT with my uncle. We were doing a renovation at a church; watching him bend EMT and then getting to do it MYSELF was a truly religious experience. There are a few things in the trade where workmanship really comes into play, such as […]

When tightening down a blower wheel or a fan blade on a motor shaft, ONLY tighten it on the flat of the shaft. If you have more than one screw but only one flat surface on the shaft, only tighten the one set screw. Also… Refrain from over-tightening set screws; they need to bite into […]

When a system has abnormally high head pressure (high condensing temperature over ambient) and compression ratio, one of the easiest things to look for is a dirty condenser coil. More often than not, that will be the cause. However… There is another category of issues that can cause high condensing temperature (high head pressure), but these […]