This article was written by HVAC contractor and Building Science Whiz, Michael Housh. Thanks, Michael! For a while, I’ve fallen into this camp where I feel Manual J overshoots heating loads. First off, I would like to say that Manual J is only as good as the information you give it, but we often run […]

Photo by Stephen Rardon I hear it all the time. Someone will talk about undesired condensation on an air handler cabinet, on a supply air duct, in a ventilation duct, or on a vent like the one above. In reply, someone will inevitably say, “Condensation occurs where hot meets cold.” Early on in my career, […]

If you work in refrigeration, you may have heard the term “hot pull down.” This phrase describes a condition where the load on the evaporator is above design due to the box temperature or the temperature of the product in the box being higher than it would normally be. My grandpa called me a few […]