When you work on a heat pump system and want to test defrost, you can follow many different test procedures to test the board and sensors. Most involve “forcing” a defrost by shorting out pins on the board or advancing the time of the defrost initiation and installing a factory-provided pin jumper. Lots of pins […]

First, let's give proper credit. Most of the best practices and tools for diagnosing ECM and X13 motors come from Regal/Genteq and their site, thedealertoolbox.com, and their app, The Dealer Toolbelt. Your best bet is to follow the practices shown there and use their TECInspect diagnostic tool shown below. Here is the general process to […]

This tech tip comes from our contributor, compressor decapitator, and super tech Ulises Palacios. Many ductless systems and some high-efficiency unitary systems have electronic expansion valves. If you find one that is stuck closed, you may be able to get it open temporarily by putting a strong magnet like the one shown above on the […]