When you ask many people nowadays how to check the charge on a heat pump during low outdoor temps, they will say that you need to “weigh in and weigh out” the charge. While this may be an effective method, it isn't always practical. Now, if you are making a refrigerant circuit repair, weighing out […]

Note: My brother Nathan wrote this a few years back, and I only did some minor editing. A pool heat pump is essentially a water-cooled air conditioner in reverse. It usually has a large air evaporator on the outside that looks like a condenser coil and a heat exchanger (usually tube-in-tube) on the inside. A […]

Here's the first question: Does it really matter if the speed taps on a motor are run or common? Well, yes… sort of. In some cases, it helps to identify if you're dealing with an open winding or an open thermal overload. The thermal overload breaks common, but you will still read a path between […]