When a system has abnormally high head pressure (high condensing temperature over ambient) and compression ratio, one of the easiest things to look for is a dirty condenser coil. More often than not, that will be the cause. However… There is another category of issues that can cause high condensing temperature (high head pressure), but these […]

As an A/C tech, I can sometimes get the terms “defrost termination” and “defrost fail-safe” mixed up because they sound pretty similar. Before we cover these terms, let's set the basic defrost groundwork for refrigeration (coolers and freezers). Defrost is accomplished in one of a few ways; these first two only apply to “coolers” where […]

First, let's get something straight: BRAZING is when you use a filler rod that isn't the same material as the base metal but melts ABOVE 840°F. Soldering is the same but at temperatures BELOW 840°F. With HVAC rods melting at around 1200°F, it confuses me why we usually call it “silver solder” but also often call it […]