Basic Electrical Theory February 13, 2024, 1:22 pm

Comments

Related Tech Tips

Pitch on Line Penetrations
Most techs and installers know that drains need to be pitched. I use the rule of thumb that drain lines should generally be pitched 1/4″ per foot of horizontal run. One thing that can easily be forgotten is pitching wall penetrations when drilling. It's as simple as drilling with a slight upward angle if drilling […]
Read more
Avoiding and Eliminating Callbacks
Callbacks are horrible. They kill the trade from every possible angle. They destroy customer satisfaction and reduce technician morale by causing long hours, resulting in unprofitability for companies and less earning opportunity for everyone. Possibly worse of all, callbacks tell customers that you are no better than their cousin the maintenance man, or worse, the […]
Read more
Condenser Coil Cleaning Step by Step
The photo above is of a real condenser coil we cleaned. The outer fins looked OK, but dirt and lint were packed deep inside. We also had sky-high head pressure and condensing temperature; those are telltale signs of an impacted condenser. That situation illustrates that a coil can sometimes look OK at first glance but […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from