First, let's give proper credit. Most of the best practices and tools for diagnosing ECM and X13 motors come from Regal/Genteq and their site, thedealertoolbox.com, and their app, The Dealer Toolbelt. Your best bet is to follow the practices shown there and use their TECInspect diagnostic tool shown below. Here is the general process to […]

You are probably all familiar with radiant barriers. Sometimes, it is thin foil draped under the roof deck. Other times, it's used on the inside of stud walls or over furring strips before the drywall goes up, and there is even plywood with a radiant barrier attached to one side that is used for roof […]

There are many acceptable methods for making a wire splice, and you need to consider many different factors when making a splice. Here are a few considerations. High Voltage vs. Low Voltage – If the connection is 24V or less, it USUALLY has fewer NEC (National Electrical Code) rules and regulations concerning how the connections are […]