Basic Electrical Theory April 8, 2022, 5:06 am

April 8, 2022

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this episode of HVAC School, hosts Bryan Orr and Bert discuss practical tips for preventing callbacks and failed inspections in residential HVAC installs and maintenance.

Bryan and Bert stress the importance of getting the basics right, like properly cleaning condensate drains, ensuring proper drain pitch, and sealing ducts completely before relying on tapes and mastic to cover gaps. They emphasize verifying full system operation at the end of a job, from checking that drains flow freely to testing float switches and pressure testing for leaks. Bryan and Bert also cover wire and breaker sizing for equipment changes, securing disconnects, proper thermostat wall seals, inspecting joints with bubbles to find microscopic leaks, and more thorough evacuations and leak checks.

Throughout the casual, conversational show, the hosts inject colorful commentary on doing quality work with a little sarcasm, including praising the merits of duct board and flex ducts. The tone is partly tongue-in-cheek but drives home the point that shortcuts lead to callbacks and leave clients dissatisfied.

Bert and Bryan also discuss:

Becoming masters of the obvious
Common condensate line issues
The issues with double traps
Ensuring adequate filter access for the customer
Wiring float switches in series vs. in parallel
Sealing ductwork effectively
Using your senses to find airflow leaks in the ductwork
Pressure testing for refrigerant leaks
Common leak points in systems and their causes
Correct electrical setup and markings
Securing outdoor unit placement
Sealing thermostat wall penetrations
Thorough evacuation and leak checks

Learn more about the 5th Annual HVACR Training Symposium at https://hvacrschool.com/Symposium24.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.”

Subscribe to our YouTube channel at https://www.youtube.com/@HVACS.

Check out our handy calculators HERE or on the HVAC School Mobile App (Google Play Store or App Store).

Search Episodes

Common Callbacks and Failed Inspections on Install

12/07/2023

Bryan Orr

When Permits Are Not Needed – Short #181

12/05/2023

Bryan Orr

What's Different About Pool Heaters w/ Bert

11/30/2023

Bryan Orr

Farads, Micro and Pico – Short #180

11/28/2023

Bryan Orr

All About 90% Furnaces

11/23/2023

Bryan Orr

Analog vs. Digital Sine – Short #179

11/21/2023

Bryan Orr

Why and How of Combustion Analysis w/ Tyler Nelson

11/09/2023

Bryan Orr

Checking a Heat Pump in Heat Mode – Short #178

11/07/2023

Bryan Orr

An IAQ & Dehum Case Study w/ Genry & Nikki

11/02/2023

Bryan Orr

Creating a Business Where Everyone Wins w/ Tommy Mello

10/26/2023

Bryan Orr

Search Results placeholder

Comments

Related Tech Tips

Sealing Boxes/Boots/Cans

Today's tech tip is a video put out by my friend Brad Hicks from the HVAC in SC YouTube Channel. Thanks, Brad! Seal boots to prevent raccoon leaks. Ok, this has nothing to do with raccoons, but I like that photo. Whenever you are installing duct boxes (also called boots or cans) in an aftermarket […]

Don't Get Depressed (Unless You're a Core)

This website is for professional HVAC techs and those actively learning to become professional HVAC techs, not DIY homeowners. I feel like that needed to be said before I state these seemingly obvious facts, but these very obvious facts are so commonly mistaken that it needs to be covered. Take a look at the two […]

Pull The Condenser Top

The photo above is from a video one of my techs took of proper condenser cleaning. I must say, he did a GREAT job of cleaning the coil, and he was very careful with the top. However, I STILL would have liked to see him pull the condenser top completely during a full maintenance procedure. […]

More tech tips