Service calls about condensing fan motor failure are quite common. Even though fan motor replacement is a standard procedure for residential split systems, it requires careful attention to safety and detail.  This article will give you a step-by-step guide to replacing condensing fan motors. Along the way, we will also explain a few best practices […]

We've been getting many questions on micron gauges that are ”going haywire” or reading in the micron range, even at atmospheric pressure. First, micron gauges measure absolute pressure, so you can’t ”zero” them out. They use tiny, very sensitive sensors that are calibrated to air, not refrigerant, so anytime refrigerant gets into the gauge, it's […]

Fundamentally, three-phase, alternating current motors are about as simple as a motor gets. The power company produces three phases by spinning magnets. Then, on the other end, we produce electromagnets that spin the motor according to the same 60 cycles per second frequency (60hz). All three phases are 120 degrees out of phase from one […]