This article was written by my buddy and Canadian Supertech Tim Tanguay. Thanks, Tim! This P/E chart shows R410a at 100°F saturated condensing temp, 10°F SC, 40°F saturated suction temp, 20°F SH at the compressor. The green highlighted thumb shape is the saturation zone. Everything that occurs in the saturation zone is a latent (change […]

There are three reasons why I don't like infrared thermometers for many HVAC tasks. #1 – The laser is misleading The laser dot is just a point of reference, not an exact point where it is reading. Often the thermometer will read lower, higher, or over a MUCH wider area. Unless you are right up […]

One of the most common parts to fail on a single-phase HVAC system is the run capacitor, so much so that we sometimes refer to junior techs as “capacitor changers.” While capacitors may be easy to diagnose and replace, here are some things many techs may not know: Capacitors Don't “Boost” the Voltage  A capacitor […]