In many cases when a low-voltage or control circuit blows a fuse, it's because one of the circuits is shorted to ground or common. That may happen because of rubbed-out wires, shorted components or boards, etc. Routing wires sensibly and using proper grommets to avoid rubouts and shorts will help prevent those problems. Less commonly, […]

Over the last 30 years, there has been a big move away from conventionally framed roof structures towards engineered structures— specifically engineered trusses and load-bearing engineered beams like micro laminated and even steel. I have been in so many attics where the engineered roofing or other load-bearing structures have been cut to accommodate equipment, wires, […]

Just so you don't get bored and quit reading, let's get straight to the point. When the blower runs for more than a few minutes after the system has cycled off in cool mode, the air may continue to be “cooler” (lower sensible temperature) coming out of the supply. However, the heat content of the […]