Basic Electrical Circuits February 5, 2024, 2:05 pm

Comments

Related Tech Tips

Do You Replace the Contactor and Capacitor With a New Compressor
Replacing a compressor is expensive, time-consuming, and physically taxing. If we are replacing a compressor, I want us to be doggone sure we aren't going to be dealing with the same thing again, and this often includes a shiny new contactor and capacitor (on single-phase units). We received a comment recently that called out the […]
Read more
Why Measuring Static First Isn't Always Productive
There is a big move in residential and light commercial HVAC toward measuring static pressure regularly during commissioning, service, and maintenance. Don't get me wrong… Measuring static pressure is VERY important. The challenge comes in when techs begin taking measurements without understanding where to take them, what they mean, or worse: they use measurements as […]
Read more
Micron Gauges Gone Wild
We've been getting many questions on micron gauges that are ”going haywire” or reading in the micron range, even at atmospheric pressure. First, micron gauges measure absolute pressure, so you can’t ”zero” them out. They use tiny, very sensitive sensors that are calibrated to air, not refrigerant, so anytime refrigerant gets into the gauge, it's […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from