Most motors are designed to a set amount of work, usually rated in either watts or horsepower (746 watts per HP). Watt's law states that watts = volts x amps. If a particular motor needs to do 1 horsepower of work at 120 volts, it will draw about 6.22 amps. And yes, in an inductive […]

This is the tale of how I found myself stuck on a service call for over 12 hours on a weekend due to my failure to re-diagnose an issue. I was working for a service company that had many accounts with local gas stations. These were large customers, and we did everything we could to […]

We all see a lot of questions about dyes, leak stoppers, lubricants, inhibitors, and snake oil. All of those were designed to go into the refrigerant circuit and “improve” something. I just go back to what Ray Johnson always said. (Ray is one of my early heroes in the biz, and he taught me a […]