See the photo above? This is a unit we (my company) serviced for a commercial customer. It doesn't matter if we aligned the belt, dialed in the charge, cleaned the condenser (using THIS thorough process), and got the drain pan clean. We look like dummies because the panel fell off. Also, as you may notice, […]

Connecting more than one wire on or under a single lug or connection point is called “double lugging,” and it is ONLY allowed in line voltage wiring under one condition, according to NEC 110.14: If the terminal, lug, or connector is specifically rated for more than one wire In the case of a conductor splice, […]

This tip was a COMMENT on the sensible heat ratio tip left by Jim Bergmann. As usual, Jim makes a great point; once you get the “sensible” capacity for a piece of equipment at a set of conditions, you can easily calculate a true target delta T. Another interesting thing you can do is use […]