STOP Overthinking! – QA Short #204

In this short podcast from our Q&A series, Bryan answers a viewer question and implores you to STOP overthinking in the trade! He also shares a parable and some tips to help stop overthinking, especially if you're just starting out in the trade.

In many cases, the simplest assumption is the right one (this is called Occam's Razor). We can always start with the most obvious or simplest possible answer. We can become mindful of our tools, such as by making sure our seals are intact, and we become masters of the obvious.

Perfecting little things (and micro-tasks) can help you become more familiar with the tools you use and the equipment you work on, and you start to develop a bigger-picture understanding of your craft. Cleaning the equipment and organizing your tool bag goes a long way; you can unlock the ability to zoom out and spot mistakes that you otherwise wouldn't have thought of otherwise.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.

Comments

Q&A on Superheat – Short #223

Duct Cleaning – How Long & How Often?

Are EVs an Opportunity? – Short #222

Choosing HVAC Cleaners w/ Becca from Viper

Q&A – Evap Placement – Short #221

Can Ducts Be Cleaned Ethically?

Should I Fog or “Sanitize” My Ducts? – Short #220

Condensing Furnace Drain Guidance w/ AC Service Tech

What Can Be Done About Healthcare? w/ Ethos

How to Predict Air Flow Issues in the Sales Process

##hvacschool #hvac #HVACR #MasterMicroTasks #OccamsRazor #StopOverthinking

Author:

Bryan Orr

Company: HVAC School

Position: Founder

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this short Q&A podcast episode, Bryan answers a listener-submitted question about superheat, including what it is and how we measure it.

Superheat is the number of degrees a refrigerant is above its saturation point. The saturation point is where you will have a liquid-vapor mix, so superheat only exists when a substance is a vapor. Saturated refrigerant should only exist in the evaporator and condenser, during which it is being boiled or condensed.

We usually measure superheat at the evaporator coil outlet and compressor inlet. The superheat at the evaporator outlet is usually around 5-14 degrees Fahrenheit, and it’s often between 10 and 20 degrees at the compressor inlet (compressor superheat). However, many systems try to get lower superheat values, and some manufacturers may require higher superheat values at the compressor inlet to prevent liquid refrigerant from getting into the compressor. Accumulators can help keep liquid refrigerant out of the system as well. We may also measure superheat coming out of the compressor on the discharge line (discharge superheat); this superheat may exceed 100 degrees Fahrenheit. Discharge superheat can let you know if the compressor is overheating the oil and causing breakdown or carbonization.

We use superheat to set the charge for fixed-orifice metering devices (as opposed to subcooling for TXVs), as superheat is a measure of how well we’re feeding our evaporator coil. When the system is off, the superheat will be 0. A system will equalize, and the refrigerant will be at saturation when that happens.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.