All-Spark - HVAC School

The All-Spark™ ignition module is a game-changing universal part that can replace over 1000 factory intermittent pilot and direct spark ignition assemblies. It also integrates with the White-Rodgers Connect app, which allows you to set it up and configure it quickly. If something ever goes wrong, the app also helps out with streamlined diagnosis, saving you time and energy in the field.

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this episode of the HVAC School podcast, host Bryan dives deep into the topic of vacuum in HVAC and refrigeration systems. He addresses two questions from social media about vacuum, expanding them into a comprehensive discussion of best practices, common issues, and techniques for effective vacuum procedures.

Bryan starts by explaining where to ideally locate a vacuum pump when working on a refrigeration system. He emphasizes the importance of pulling from the largest volume locations possible, often at multi-position service valves on the compressor or wherever accessible ports are available. He notes that systems that have been in operation pose unique challenges due to refrigerant dissolved in the oil, which can significantly increase vacuum time.

The podcast then covers the “one hose method” for pulling vacuum, detailing the process of using a single large hose connected to the suction side with the core removed, while placing the micron gauge on the liquid side. Bryan explains how this method can be highly effective for new systems but may take longer for systems that have been in operation. He also discusses the importance of valve quality.

Key topics covered in the podcast include:

Ideal vacuum pump location in refrigeration systems
The “one hose method” for pulling vacuum
Challenges of vacuuming systems that have been in operation
Using heat and nitrogen to improve vacuum efficiency
Importance of quality valves and tools in vacuum procedures
Proper maintenance of vacuum pumps and micron gauges
Dealing with refrigerant dissolved in oil during vacuum
The science behind evaporation at the oil-vapor interface
Tips for speeding up vacuum in difficult conditions
Recommended resources for further learning about vacuum techniques

Get your copy of Review of Vacuum for Service Engineers at TruTech Tools HERE.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.