Ryan Gorman

Most techs and installers know that drains need to be pitched. I use the rule of thumb that drain lines should generally be pitched 1/4″ per foot of horizontal run. One thing that can easily be forgotten is pitching wall penetrations when drilling. It’s as simple as drilling with a slight upward angle if drilling […]

When tightening down a blower wheel or a fan blade on a motor shaft, ONLY tighten it on the flat of the shaft. That flat is machined into the shaft on purpose. It gives the set screw a face to bite into instead of a curve to slide off of. On most residential motors, it […]

How does a typical single-phase motor know how fast to run? Typical induction motors depend on the electrical cycle rate of the incoming power (measured in hertz) for their speed. Our power in the US makes one complete rotation from positive electrical peak to positive peak 60 times per second, or 60hz (50hz, or 50 […]

Ryan Gorman comes on the podcast to discuss the differences between a college education and early career opportunities in the skilled trades. Many parents feel pressured to send their children to college and encourage them to get a four-year degree. Despite what society may lead us to believe, there is no shame in thinking that […]