Ed Janowiak Archives - HVAC School

Ed Janowiak

Company name: Air Conditioning Contractors of America (ACCA)

Position: Manager of HVAC Design Education

Ed Janowiak is the Manager of HVAC Design Education at ACCA. He is well-versed in the ACCA manuals and spends most of his time educating others about their practical applications, especially as they relate to HVAC system design and installation. Ed has also owned an HVAC and energy consultation company, worked as a full-time trainer, and serves as a consultant for TEC.

Posts by:

What Equipment Selection Will Look Like With the Updated Manual S

Fundamentals of Duct Design

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

Phil Barr and Nathan Orr join the podcast to talk about wiring refrigerated cases in commercial spaces, including convenience stores and supermarkets.

Cases may be medium-temp (or high-temp, in some cases) or low-temp. Medium-temp cases can typically defrost on their own during the off cycle, and low-temp cases may have electric or hot-gas defrost to help get ice off the coil at set intervals. Each system has an evaporator (and fans), compressor, condenser, and metering device (often a TXV or EEV), and low-temp refrigeration may have anti-sweat heaters, EPRs, and other components to manage.

Challenges arise when electricians don’t understand the fundamentals of commercial refrigeration, especially as the electrical circuitry relates to the refrigeration circuit components. Time crunches also apply a lot of pressure to electricians and refrigeration technicians. Testing circuits, such as fans and lighting, or using circuit tracers are good ways to get an idea of how an existing system is wired. Labeling wires and breakers and keeping those labels or information in places where others can read them can help you and other electricians in the future.

One of the most common issues happens when technicians or electricians refuse to test out their results to catch their mistakes before callbacks happen. Even seemingly small electrical issues, such as improper lighting, can cause costly losses if product spoils and cannot be sold.

Phil, Nathan, and Bryan also cover: