I’d like to give special thanks to Roman Baugh for the section about compressor superheat. It’s not something we talk about very often outside of chiller and commercial refrigeration applications, but it definitely has value in the HVAC world as well. Thanks, Roman! Since I started in the trade, we would take discharge line temperature […]

Electronic expansion valves (or EEVs) are metering devices that you’ll find in a variety of modern HVAC equipment, including heat pumps, VRF units, inverter mini splits, and chillers. This valve is electronic rather than mechanical and can precisely control the flow of refrigerant into the evaporator and optimize efficiency for heating and cooling units.  Other […]

This tech tip recaps the livestream by the same name, featuring HVAC School contributors Matt Bruner and Adam Mufich, as well as special guest Steve Cook from Hisense. You can watch that livestream on our YouTube channel HERE. We also owe special thanks to Roman Baugh, who added some extra information on the topic.  Communicating […]

NOTE: If you cannot view the recording, the video may still be processing. The maximum wait time is 24 hours. We apologize for the delay and appreciate your patience.

  NOTE: If you cannot view the recording, the video may still be processing. The maximum wait time is 24 hours. We apologize for the delay and appreciate your patience.

 Roman Baugh, Matthew Condron, and Luke Peterson discuss the importance of proper condensate drain installation and maintenance, particularly in commercial applications. The conversation begins with the hosts examining the typical drain configurations seen in different regional markets, highlighting the significant variations in practices across the country. Sizing and configuration of condensate drains can have […]

 Roman Baugh joins the podcast to talk about oil return and the refrigerant charge in VRV systems. VRV systems—also known as variable refrigerant volume (or variable refrigerant flow/VRF) systems—have one outdoor unit, one or multiple compressors, and multiple indoor units. The outdoor unit modulates to meet the indoor units’ fluctuating demands. They are versatile […]

Let's talk about the magic that is inverters and how to test the boards that drive this technology. Inverters play an extremely important role in household appliances, industrial machinery, and the rising popularity of household HVAC systems. Inverters consist of a wide variety of electronic circuitry, and there are many situations in which they need […]

The photo above is from a video one of my techs took of proper condenser cleaning. I must say, he did a GREAT job of cleaning the coil, and he was very careful with the top. However, I STILL would have liked to see him pull the condenser top completely during a full maintenance procedure. […]

We’ve all been in the unenviable position of unsweating a compressor and getting blasted in the eyes with a waft of gas that smells like burning sulfur from the pits of Hades. As we stagger back, covering our noses and holding our breaths, memories of the phrase “phosphene gas” from trade school or World War […]

The title says it all. It should be one of the first things you learn when you started. However, I have seen a lot of experienced techs who seldom (if ever) do it. When connecting to a tank, purge your hose by cracking the center connection at the manifold for a second. When connecting to […]