Nomenclature and How to Use It
Nomenclature on HVAC/R equipment is a sequence of numbers and letters a manufacturer uses to speak directly to the technician. Lots of initial upfront information is handed to the technician by the manufacturer the moment the technician reads the nomenclature in the model and serial numbers. So how do we make sense of these seemingly […]
Read more
Removing a Blower Motor
I’ve seen a lot of guys recently who reach for the motor puller tool first thing when attempting to remove a blower motor from a wheel/fan blade. Motor puller tools are an awesome backup tool when needed, but that shouldn’t be the go-to method of removing a motor.   The main issue with using a […]
Read more
Dielectric Grease: What It Is, and How To Use It
  Dielectric grease is an often misused and misunderstood product that could easily benefit HVAC/R technicians in a variety of ways. From food service to electrical connections, dielectric grease can help lubricate mechanical components and prevent corrosion on electrical connections. But we need to understand what it is to begin with, in order to properly […]
Read more
Sensors, Measurements, and Physics
Sensors, Measurements, and Physics As HVAC/R Technicians, we use tools and instruments to make measurements every day. In fact, 90% of our job could not be done efficiently without some kind of measurement.  “How do we measure?” “With what instruments?” “How accurate are these measurements?” These are all questions a thoughtful technician should ask before […]
Read more
Coil SHR, Ventilation, and Bypass Factor – Advanced Psychrometrics Part 2
This is the second article in a three-part series, where Advanced Psychrometrics are explored. The source material for each of the articles in this series is ACCA Manual P Sections 3, 4, and 5. This article is based on information found in Section 4. If you followed the previous Advanced Psychrometrics article, you now know […]
Read more
Room Sensible Heat & CFM – Advanced Psychrometrics Part 1
This is the first of a three-part series of articles, which will dive deep into Advanced Psychrometrics. The source material for each of these articles may be found in ACCA Manual P Sections 3, 4, and 5. This article is based on information found in Section 3.  Psychrometrics is the study of the physical and […]
Read more
How to Use a Manufacturer Fan Table: And Why They are Important
Many installers and service technicians know how to read and use a manufacturer fan table, but this is a quick review with a few extra tips for newer techs. It’s also a good reminder to senior technicians how this easy-to-use practice can also be easily abused. At installation, it is imperative to the performance and […]
Read more
Locating a Low Voltage Short in Residential A/C Systems
     Newer technicians often get hung up and frustrated when searching for low voltage shorts. This is understandable due to the broad spectrum of possibilities for the location of the short. However, this doesn’t mean the process needs to be complex. The time it takes to find a low voltage short may vary greatly depending on […]
Read more
Ventilation, Filtration, and Humidity Control: The Holy Trinity of IAQ
At the time of the publication of this article, COVID-19 (coronavirus) is spreading across the world at an alarming rate, and many people have self-quarantined to help slow and/or stop the spread of the virus. These precautionary measures are prudent and responsible. However, with the increased amount of time people will now spend inside their […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from